Bilayer Predictive Power Flow Controller for Bidirectional Operation of Wirelessly Connected Electric Vehicles

This paper presents a comprehensive solution that allows a wirelessly connected electric vehicle (EV) to be autonomously charged and discharged, during long-term parking and/or transient stops. A bilayer power flow controller for bidirectional wireless power transfer system (BWPTS) in EVs applications is proposed. The proposed controller can manage the power flow between the EV and surrounding infrastructures, such as utility grid, home micro-grid, building micro-grid, road, or another vehicle. It consists of two control layers; the first is responsible for communicating with the surrounding infrastructures and gathering information from the vehicle operator, charging station, utility grid, and battery management system. These data are analyzed to generate the reference power signal with information about the mode of operation (charge, discharge, or abstain) and rate. The second layer receives the reference signal and predicts the control parameters for the resonant converters (on both the vehicle and grid sides) to track the desired power. The proposed algorithm is adaptively estimating the mutual inductance to consider the misalignments in the system, based on a new simple real-time mutual estimation algorithm using a single voltage measurement from the vehicle side. The second control layer is designed based on an accurate analytical model for the BWPTS's power flow. For verification purposes, a prototype for BWPTS was built and driven by the proposed controller, which was implemented using a field-programmable gate array integrated circuit. Also, a vehicle-level simulation was performed to validate the operation of the proposed controller in quasi-dynamic wireless charging at traffic signals. The proposed controller shows fast and stable response during both the transient and steady-state operation in comparison with the conventional proportional-integral controller.