Triangle Fault Diagnosis Method for SF6 Gas-Insulated Equipment

The use of SF₆ gas decomposition components for the fault diagnosis of gas-insulated equipment (GIE) has received widespread attention and been extensively adopted by the power industry. However, the present focus is mainly on the use of a component type or absolute content for generating qualitative judgments on the existence of a fault, and the practical diagnosis method for field diagnosis is extremely lacking. In this paper, ten-year fault data were collected and analyzed. Decomposition components were extracted and combined, based on the decomposition characteristics of SF₆, and enhancement factors were given to three component characteristic quantities using fuzzy C-means clustering algorithm. The component characteristic quantities that characterized the high-energy discharge fault, partial discharge, and partial over-thermal fault of the device were extracted: % (SOF₂+SO₂), % (9SO₂F₂), and % (5CO₂). With adoption of these characteristic quantities as the coordinate axes of the triangle coordinate system, a triangle fault diagnosis method for field diagnosis of SF₆ GIE was constructed. The diagnosis method was validated by a large number of experimental data and field failure data, and 128 of the 150 experimental samples were correctly recognized. Moreover, the test conditions did not considerably affect the diagnostic results of the method. This technique can provide a simple and effective field diagnostics technology for the power industry.