Synthesized Method of Dual-Band Common-Mode Noise Absorption Circuits

This paper proposed a method of synthesizing absorptive common-mode filters (A-CMFs) analytically with high absorption efficiency and two designable absorption bands. The proposed method is carried out by a novel circuit architecture and its analysis procedure. In differential mode, the integrity of the differential signals is maintained, and in common mode (CM), two absorption frequency bands can be obtained theoretically. These bands are designable with the analytical equations derived in this paper, so a dual-band or broadband A-CMF design can be easily synthesized by our proposed method. The authors also show that this method can make any one of R-CMFs “upgrade” to an A-CMF by simply adding an additional circuit, and this might be a revolutionary progress for the currently used CM-suppression techniques. To make the proposed concept more understandable, an example is used to demonstrate how the synthesizing methodology works, where a broadband A-CMF with its absorption bands located at 2.4 and 3.6 GHz is designed and implemented. Furthermore, a test sample of this A-CMF is fabricated on a four-layer printed circuit board. It is measured on a probing station, and the measured results are very similar to the simulated results. Finally, a comparison table of all the related works is given, showing that this proposed method really makes a significant improvement for A-CMF techniques. It is worth noting that this circuit design can provide a broadest 95%-absorption band to our best knowledge.