A Constant On-Time Control With Internal Active Ripple Compensation Strategy for Buck Converter With Ceramic Capacitors

Constant on-time control has been widely used due to its advantages of fast transient response and light load efficiency. However, the control scheme is intrinsically unstable if the output capacitor's equivalent series resistance (ESR) is not large enough, which needs ripple injection techniques to enhance loop stability. The traditional passive ripple compensation technique uses only passive component networks to realize this function, which exhibits some inherent shortcomings, including difficulties in high-speed current sensing amplifier design and large chip area consumption. This paper proposes an internal active ripple compensation strategy that senses the low-side power mosfet current and extracts relevant ac information for feedback-ripple enhancement. Output-voltage dc offset does not occur and subharmonic instability is significantly improved even with ceramic capacitors. The circuit architecture has been realized in a synchronous buck regulator with a 0.5 μm 40 V bipolar-CMOS-DMOS (BCD) process. The programmable switching frequency is up to 1 MHz and the maximum load current is 4 A. Simulation and experimental results are given to prove the proposed high performance.