A Threshold Switch Augmented Hybrid-FeFET (H-FeFET) with Enhanced Read Distinguishability and Reduced Programming Voltage for Non-Volatile Memory Applications

In this work, we demonstrate a novel Hybrid-FeFET (H-FeFET) that leverages the threshold switching characteristics of Ag/HfO
₂
to overcome the fundamental trade-off between memory window MW /read current ratio (I
_read,1
/I
_read,0
) , and program voltage (V
_prog
)/maximum electric-field in standard FeFETs for non-volatile memory application. The H-FeFET incorporates the threshold switch (TS) in the source of the FeFET, and is designed to exhibit a ferroelectric state-dependent volatile HRS to LRS transition (I
_ON
/I
_OFF
>10
⁷
) - during read, the TS turns ON only if the FeFET is in the low-V
_T
SET state, and remains OFF if the FeFET is in the high-V
_T
RESET state, thus, selectively suppressing the RESET read current. Leveraging this principle, the H-FeFET: a Demonstrates 77% higher MW and 1000× larger I
_read,1
/I
_read,0
compared to the FeFET, at iso-V
_prog
(DC); (b) Enables 25% reduction in V
_prog
at iso-I
_read,1
/I
_read,0
during pulse operation-facilitated by the 8× improvement in I
_read,1
/I
_read,0
; (c) Exhibits 2.5×reduction in programming power at iso-I
_read,1
/I
_read,0
in the H-FeFET-based AND array architecture, as shown by simulations. Thus, the H-FeFET overcomes the FeFET design challenges while retaining its existing advantages, making it a promising candidate for nonvolatile memory applications.