Augmented Reality for Feedback in a Shared Control Spraying Task

Using industrial robots to spray structures has been investigated extensively, however interesting challenges emerge when using handheld spraying robots. In previous work we have demonstrated the use of shared control of a handheld spraying robot to assist a user in a 3D spraying task. In this paper we demonstrate the use of Augmented Reality Interfaces to increase the user's progress and task awareness. We describe our solutions to challenging calibration issues between the Microsoft Hololens system and a motion capture system without the need for well defined markers or careful alignment on the part of the user. Error relative to the motion capture system was shown to be 10mm after only a 4 second calibration routine. Secondly we outline a logical approach for visualising liquid density for an augmented reality spraying task, this system allows the user to see target regions to complete, areas that are complete and areas that have been overdosed clearly. Finally we produced a user study to investigate the level of assistance that a handheld robot utilising shared control methods should provide during a spraying task. Using a handheld spraying robot with a moving spray head did not aid the user much over simply actuating spray nozzle for them. Compared to manual control the automatic modes significantly reduced the task load experienced by the user and significantly increased the quality of the result of the spraying task, reducing the error by 33-45%.