GPS roadside integrated precision positioning system

A real-time integrated navigation system with 2-cm position accuracy was developed using commercial off-the shelf (COTS) equipment including inertial sensors and differential Global Positioning System (GPS) receivers, and was demonstrated for transportation applications with an emphasis on lane departure detection. A 900-MHz radiofrequency communications link transmits GPS base station range and carrier phase measurements to a GPS receiver on the vehicle. The GPS receiver calculates the vehicle position relative to the surveyed base location. The loosely coupled eight-state extended Kalman filter with 10-Hz navigation aids provides smoothed position information between 2-Hz GPS updates and provides graceful degradation in the presence of GPS blockages or communication dropouts. Currently, the navigation aids include anti-lock braking system wheel turns, electronic compass heading and pitch, and map vertical height. Data acquisition and Kalman filtering systems were developed to handle real-time processing and recording of all instrument data for further post-test system evaluation to determine the optimum configuration. An accurate rapid survey and map representation approach for measuring lane boundaries was validated using a vehicle, demonstrating inherit repeatability by the GPS positioning system. Real-time lane departure monitoring was developed. A video camera was installed to assist in accurate surveying and real-time system validation. This GPS-based positioning system is suitable for highway speeds during all weather conditions. It can be extended to other collision avoidance, drowsy driver awareness, advanced curve or intersection warnings, SOS, tracking, automated control, fast precision road mapping, and traffic management applications.