Design of an IoT smart home system

This paper basically deals with design of an IoT Smart Home System (IoTSHS) which can provide the remote control to smart home through mobile, infrared(IR) remote control as well as with PC/Laptop. The controller used to design the IoTSHS is WiFi based microcontroller. Temperature sensor is provided to indicate the room temperature and tell the user if it's needed to turn the AC ON or OFF. The designed IoTSHS need to be interfaced through switches or relays with the items under control through the power distribution box. When a signal is sent from IoTSHS, then the switches will connect or disconnect the item under control. The designed IoT smart home system can also provide remote controlling for the people who cannot use smart phone to control their appliances Thus, the designed IoTSHS can benefits the whole parts in the society by providing advanced remote controlling for the smart home. The designed IoTSHS is controlled through remote control which uses IR and WiFi. The IoTSHS is capable to connect to WiFi and have a web browser regardless to what kind of operating system it uses, to control the appliances. No application program is needed to purchase, download, or install. In WiFi controlling, the IoTSHS will give a secured Access Point (AP) with a particular service set identifier (SSID). The user will connect the device (e.g. mobile-phone or Laptop/PC) to this SSID with providing the password and then will open the browser and go to particular fixed link. This link will open an HTML web page which will allow the user to interface between the Mobile-Phone/Laptop/PC and the appliances. In addition, the IoTSHS may connect to the home router so that the user can control the appliances with keeping connection with home router. The proposed IoTSHS was designed, programmed, fabricated and tested with excellent results.