50-kW 1kV DC bus air-cooled inverter with 1.7 kV SiC MOSFETs and 3D-printed novel power module packaging structure for grid applications

The traditional heatsink design technologies for forced air-cooling and power semiconductors with low junction temperatures have constrained the converters to be designed with massive heatsinks. The low power losses of WBG device technology and higher junction temperature operation over a wide operating range of power have not been fully utilized with liquid-cooled systems. The other major limitation has also been the traditional power module packaging “stack” approach with baseplate. This paper presents a novel power stage design which involves 1.7 kV silicon carbide (SiC) MOSFETs, a heatsink design with Genetic Algorithm (GA) and built using 3D printing technology, and a novel integrated modular power module for high power density. The air-cooled module assembly has a SiC MOSFET phase leg module with split high-side and low-side switches and a gate driver with cross-talk and short circuit protection functions. The heatsink design was modeled using a co-simulation environment with finite element analysis software and GA in MATLAB and COMSOL. The proposed concepts were verified and validated through experiments at each stage of development. The power stage was evaluated at 800V, 900 V, and 1kV for 20 kHz switching frequency and 50-kW load. The experimental results show that the CEC efficiency is 98.4 %. In addition to the efficiency, a power density of 75 W/in
³
was also achieved.