Cryo-Ultrasonic NDE: Ice–Cold Ultrasonic Waves for the Detection of Damage in Complex-Shaped Engineering Components

Recent advances in computational methods, materials science, and new manufacturing processes are resulting in an unprecedented design flexibility which is driving the geometrical complexity of the components found in modern structures and machines. For safety-critical components, the geometrical complexity poses a significant challenge to the sensitivity of the existing nondestructive evaluation (NDE) methods available for the detection of manufacturing defects or damage that develops while a component is in service. Although X-ray computed tomography is the primary NDE method used to test these parts in current industrial practice, it is widely recognized that it has limited sensitivity to critical defects, such as cracks, especially in the presence of large size parts made of dense materials. The lack of sensitive NDE methods represents a major technology gap that could impede the acceptance of rapidly developing technologies, such as 3-D printing, for the production of safety-critical components. This paper attempts to bridge this gap by exploring the possibility of inspecting a complex-shaped part with ultrasonic waves after it has been encapsulated in ice, under the paradigm of what can be defined as cryo-ultrasonic NDE. The underpinning hypothesis is that through ice encapsulation a complex-shaped part can be transformed into a simple-shaped solid whose volume can be probed with ultrasonic waves, which are known to be highly sensitive to both pores and crack-like defects and over a wide range of material properties. Damage detection is then performed by analyzing cross-sectional images of the ice-encapsulated part obtained by applying migration methods to the ultrasonic signals measured by an array of transducers. This paper lays the foundation for cryo-ultrasonic NDE and presents the first experimental results demonstrating the possibility of imaging defects through multiple ice–metal interfaces. This paves the way to the detection of defects in complex-shaped parts containing internal vanes which have so far limited the use of conventional NDE methods.