Resolving Practical Design Issues in a Single-Phase Grid-Connected GaN-FET-Based Differential-Mode Inverter

Microinverters for grid-connected photovoltaic (PV) power conversion systems often require voltage boost due to the low dc voltage of the PV panels. A high-frequency (HF) transformer-isolated differential-mode Ćuk inverter (DMCI) is an attractive topology due to its inherent voltage boost capability and high power density. One of the significant operational issue of the DMCI addressed in this paper is the presence of lower order harmonic distortion in the injected grid current. It is shown that lower order odd and even harmonic voltages are generated with this topology. This problem is accentuated due to the low damping offered by the grid to harmonic voltages. A systematic low-complexity control design is proposed to address this issue. It is shown experimentally that the DMCI operates stably with effective attenuation of the lower order harmonics using the proposed design. Practical operational issues of the DMCI with fast switching GaN field-effect transistor (FET) devices are analyzed and solutions are proposed. It is shown that there can be significant HF noise generation in the DMCI with a frequency range higher than the switching frequency. Practical solutions for resolving HF issues using a combination of circuit layout design and additional passive components are proposed and validated. All of the experimental results are demonstrated on a 500-W GaN-FET-based microinverter prototype.