Investigation of an Electromagnetic Wearable Resonance Kinetic Energy Harvester With Ferrofluid

Human motion energy harvester can offer clean and continuous power, and therefore plays an important role in powering mobile devices, which suffer from short standby time because of the limited capability of the battery. In this paper, we investigate an electromagnetic resonance wearable kinetic energy harvester, which is comprised of an oscillator and a carbon fiber tube with two coils wound on its surface. The oscillator is comprised of a columnar PM connected to the two end covers with two elastic strings. The designed resonant frequency is 8-10 Hz, which is higher than the major frequency range of human motion (2-4 Hz), but it can absorb high frequency energy of impulse, such as footfall. Thus, the harvester can wear on legs to absorb the kinetic energy of footfall by resonance. The ferrofluid is adopted to decrease friction, which is one of the main challenges for improving efficiency of this type of energy harvester. The ferrofluid prevents the PM from touching the wall of the tube resulting in significant friction reduction. The FEM simulation results indicate that the ferrofluid can keep the vibrator (a permanent magnet) contactless even subjecting to ten times gravity acceleration. The maximum average output power of 9.5 mW is obtained with a total weight of 80.5 g when running at a speed of 10 km/h. A energy harvest circuit is carried out and an average power of 0.28 s can be stored.