Design and fabrication of rfid antenna tag using paper substrate for low-cost RFID applications

The typical design of the RFID system deals with mainly two components which are RFID tag and the RFID reader, in which both the system consists of an antenna in it. So the antenna design is much concerned to give the expected level of radiation properties. Therefore, in this proposed paper, the RFID antenna was designed according and the Dipole Spiral antenna structure was used to produce for the RFID application. And an innovative approach of chipless RFID Tag was introduced, which was again innovated by using conductive ink technology and paper substrate to produce a typical RFID tag. So, that the replacement of EMF coil (conductive material) is done here, to eliminate the loss that occurs in the tag. And also it was approached the simplest way of system design for various RFID applications.