PMU-Based Distribution System State Estimation with Adaptive Accuracy Exploiting Local Decision Metrics and IoT Paradigm

A novel adaptive distribution system state estimation (DSSE) solution is presented and discussed, which relies on distributed decision points and exploits the Cloud-based Internet of Things (IoT) paradigm. Up to now, DSSE procedures have been using fixed settings regardless of the actual values of measurement accuracy, which is instead affected by the actual operating conditions of the network. The proposed DSSE is innovative with respect to previous literature, because it is adaptive in the use of updated accuracies for the measurement devices. The information used in the estimation process along with the rate of the execution are updated, depending on the indications of appropriate local metrics aimed at detecting possible variations in the operating conditions of the distribution network. Specifically, the variations and the trend of variation of the rms voltage values obtained by phasor measurement units (PMUs) are used to trigger changes in the DSSE. In case dynamics are detected, the measurement data are sent to the DSSE at higher rates and the estimation process runs consequently, updating the accuracy values to be considered in the estimation. The proposed system relies on a Cloud-based IoT platform, which has been designed to incorporate heterogeneous measurement devices, such as PMUs and smart meters. The results obtained on a 13-bus system demonstrate the validity of the proposed methodology that is efficient both in the estimation process and in the use of the communication resources.