NB-IoT system for M2M communication

In 3GPP, a narrowband system based on Long Term Evolution (LTE) is being introduced to support the Internet of Things. This system, named Narrowband Internet of Things (NB-IoT), can be deployed in three different operation modes - (1) stand-alone as a dedicated carrier, (2) in-band within the occupied bandwidth of a wideband LTE carrier, and (3) within the guard-band of an existing LTE carrier. In stand-alone operation mode, NB-IoT can occupy one GSM channel (200 kHz) while for in-band and guard-band operation modes, it will use one physical resource block of LTE (180 kHz). The design targets of NB-IoT include low-cost devices, high coverage (20-dB improvement over GPRS), long device battery life (more than 10 years), and massive capacity. Latency is relaxed although a delay budget of 10 seconds is the target for exception reports. The specifications for NB-IoT are expected to be finalized in 2016. In this paper, we describe the targets for NB-IoT and present a preliminary system design. In addition, coverage, capacity, latency, and battery life analysis are also presented.