Zigbee Based Centralised Patient Monitoring System

Centralised patient monitoring systems are in huge demand as they not only reduce the labour work and cost but also the time of the clinical hospitals. Earlier wired communication was used but now Zigbee which is a wireless mesh network is preferred as it reduces the cost. Zigbee is also preferred over Bluetooth and infrared wireless communication because it is energy efficient, has low cost and long distance range (several miles). In this paper we proposed wireless transmission of data between a patient and centralised unit using Zigbee module. The paper is divided into two sections. First is patient monitoring system for multiple patients and second is the centralised patient monitoring system. These two systems are communicating using wireless transmission technology i.e. Zigbee. In the first section we have patient monitoring of multiple patients. Each patient's multiple physiological parameters like ECG, temperature, heartbeat are measured at their respective unit. If any physiological parameter value exceeds the threshold value, emergency alarm and LED blinks at each patient unit. This allows a doctor to read various physiological parameters of a patient in real time. The values are displayed on the LCD at each patient unit. Similarly multiple patients multiple physiological parameters are being measured using particular sensors and multiple patient's patient monitoring system is made. In the second section centralised patient monitoring system is made in which all multiple patients multiple parameters are displayed on a central monitor using MATLAB. ECG graph is also displayed on the central monitor using MATLAB software. The central LCD also displays parameters like heartbeat and temperature. The module is less expensive, consumes low power and has good range.