Maximum Boost Control of Diode-Assisted Buck–Boost Voltage-Source Inverter With Minimum Switching Frequency

Diode-assisted buck-boost voltage-source inverter achieves high voltage gain by introducing a switch-capacitor based high step-up dc-dc circuit between the dc source and inverter bridge. As for the unique structure, various pulse width modulation (PWM) strategies are developed with regard to the chopped intermediate dc-link voltage. In order to maximize voltage gain and increase efficiency, this paper proposes a novel PWM strategy. It regulates the average value of intermediate dc-link voltage in one switching time period (T_s) the same as the instantaneous maximum value of three-phase line voltage by controlling the front boost circuit. Then, the equivalent switching frequency of power devices in the inverter bridge can be reduced to 1/3f_s(f_s = 1/T_s). The operating principle and closed-loop controller design are analyzed and verified by simulations and experiments. Compared with existing PWM strategies, the new control strategy demonstrates less power device requirement and higher efficiency in high voltage gain applications. It is a more competitive topology for wide range dc/ac voltage regulation in renewable energy applications. Furthermore, with new control strategy, the dc-side inductor current and capacitor voltage contains six-time line-frequency ripples. To overcome the undesired influence of low frequency ripples, it is also suitable for 400-800 Hz medium frequency aircraft and vessel power supply system.