Lift-Off Point of Intersection Feature in Transient Eddy-Current Oscillations Method to Detect Thickness Variation in Stainless Steel

Detection of corrosion and measurement of the thickness of stainless steel in industrial structures, such as pipelines, has been an important issue to avoid unwanted leakages. A recently proposed transient eddy-current oscillations (TECO) method has been used in this paper to measure thickness in non-magnetic stainless steel. The TECO method works based on the electromagnetic induction principle, as the conventional eddy-current testing method. An inductor (excitation coil) connected in parallel with a capacitor to generate damped oscillations is used to induce eddy currents into the test material beneath the coil. A Hall sensor, which is fixed at the bottom side and at the axial center of the excitation coil, detects the resultant magnetic field due to the induced eddy currents. Experiments were performed on the stainless steel specimens, having different thicknesses to test the potential of the TECO method. The results were analyzed using the fast Fourier transform. This paper proposes a lift-off point of intersection in the frequency domain that can be used to eliminate the false indications due to the lift-off variations during the thickness measurement of the test material. The results reveal that the proposed method can be applied to detect the thickness variations in metal structures covered with non-conductive paints or insulation coatings.