A MWCNT gyroscope fabricated by nanorobotic manipulation

A gyroscope based on Coriolis effect and fabricated by Carbon Nanotube (CNT) will be presented. A CNT is vibration at x direction, when there a rotation around z direction, acceleration happens to the y direction. The natural frequency of MWCNT is depending on the inner diameter, outer diameter and length. The CNT was driven by the electrostatic force to its nature frequency. A CNT with a length of 1 μm was used for emitter and an anode with a bias angle is etched by Focused Ion Beam (FIB) which is set to the opposite to the CNT. An electrode is set near the CNT tip, which is employed to pulling the CNT for mechanical resonances by an AC voltage. The CNT with a resonate frequency of 1 MHz and mechanical quality factor Q of 10 k is simulated. The CNT gyroscope with a rotation speed of 0.1 rad/s, 1 rad/s 10 rad/s 20 rad/s, 100 rad/s 1000 rad/s and 10000 rad/s were simulated. The gyroscope is good sensitive till 100 rad/s.