Cylindrical halbach magnet array for electromagnetic vibration energy harvesters

This paper reports the design, optimization, and test results of a new magnetic structure for kinetic energy harvesters allowing seven-fold increase in power density compared to single-magnet configuration. Electromagnetic energy harvesters with “single cylindrical Halbach array” and “double-concentric Halbach array” magnetic structures composed of NdFeB magnets with 1.4 T residual flux density were fabricated and tested: respectively 5 mW and 15 mW power was measured and generated at low-amplitude (1 mm) low-frequency (<10 Hz) vibrations. These structures yield respectively a maximum power density of 14 mW/cm
³
/g
²
and 26 mW/cm
³
/g
²
.