Measurement and analysis of internal stress distributions created in gelatin simulated-brain tissue by a pulsed laser-induced liquid jet

Transsphenoidal surgery is currently employed to treat complex lesions beyond the sella turcica; however, the procedure can be limited by difficulties encountered in dealing with small blood vessels, deep and narrow working spaces, and awkward working angles. To overcome these problems, we have developed a pulsed laser-induced liquid jet system that can dissect tumor tissue while preserving fine blood vessels within deep and narrow working spaces. We have previously evaluated the utility and safety of this procedure. However, the effects of the pulsejet after being injected into the brain are not yet well understood. Especially, the behavior of the stress distribution created by the jet is important because it has recently been reported that high acoustic pressures can affect the brain. In this study, we measured internal stress distributions in a gelatin simulated-brain using photoelasticity experiments. We used a high-speed camera with an image sensor on which an array of micropolarizers was attached to measure the stresses and the shear wave created when the pulsejet enters the simulated brain.