Loading web-font TeX/Main/Regular
MIMO Power Line Communications | IEEE Journals & Magazine | IEEE Xplore

Abstract:

Despite being a well-established ingredient to many wireless systems, multiple-input–multiple-output (MIMO) signal processing has only recently been considered for broadb...Show More

Abstract:

Despite being a well-established ingredient to many wireless systems, multiple-input–multiple-output (MIMO) signal processing has only recently been considered for broadband power line communications (PLC). Adapting multiple-antenna transmission and reception techniques to a wired medium such as the electrical grid requires solving a number of issues, both regarding the physics of electromagnetic transmission and the optimization of the signal processing strategies. In the last few years, significant steps were made to demonstrate the benefits of MIMO PLC and to develop the necessary hardware. As a result, MIMO PLC has been adopted in several broadband PLC specifications, precisely as part of ITU-T G.hn in Recommendation G.9963, and as part of the industry specification HomePlug AV2, which is backward compatible to IEEE 1901. This paper reviews important aspects of MIMO PLC, highlighting its similarities and main differences with classical wireless MIMO. It focuses first on the peculiarities of the electrical grid, with a survey of PLC channel and noise characterization in a MIMO context. It further estimates MIMO PLC channel capacity adhering to the electromagnetic compatibility regulations currently in force. In addition, MIMO signal processing techniques most suited to PLC environments are discussed, allowing for throughput predictions. It is found that eigenbeamforming is the best choice for MIMO PLC: the full spatial diversity gain is achieved for highly attenuated channels, and maximum multiplexing gain is achieved for channels with low attenuation by utilizing all spatial streams. It is shown that upgrading from a conventional single-input–single-output PLC configuration to a 2 \times 2 MIMO configuration, the throughput can be more than doubled while coverage is increased. The survey concludes with a review of specific MIMO PLC system implementations in the specifications ITU-T G.9963 and HomePlug AV2.
Published in: IEEE Communications Surveys & Tutorials ( Volume: 17, Issue: 1, Firstquarter 2015)
Page(s): 106 - 124
Date of Publication: 16 July 2014

ISSN Information:

Funding Agency:


References

References is not available for this document.