Development and performance evaluation of a single-ring OpenPET prototype

One of the challenging applications of PET is implementing it for in-beam PET, which is an in situ monitoring method for charged particle therapy. For this purpose, we have previously proposed an open-type PET scanner, OpenPET. The original OpenPET had a physically opened field of view (FOV) between two detector rings through which irradiation beams pass. This dual-ring OpenPET (DROP) had a wide axial FOV including the gap. This geometry was not necessarily the most efficient for application to in-beam PET in which only a limited FOV around the irradiation field is required. Therefore, we have proposed a new single-ring OpenPET (SROP) geometry which can provide an accessible and observable open space with higher sensitivity and a reduced number of detectors than the DROP. The proposed geometry was a cylinder shape with its ends cut at a slant, in which the shape of each cut end became an ellipse. In this work, we developed and evaluated a small prototype of the SROP geometry for proof-of-concept. The SROP prototype was designed with 2 ellipse-shaped detector rings of 16 depth of interaction (DOI) detectors. The DOI detectors consisted of 1024 GSOZ crystals which were arranged in 4 layers of 16 × 16 arrays, coupled to a 64-ch FP-PMT. Each ellipse-shaped detector ring had a major axis of 281.6 mm and a minor axis of 207.5 mm. For the slant mode, the rings were placed at a 45-deg slant from the axial direction and for the non-slant mode (used as a reference) they were at 90 deg from the axial direction with no gap. The system sensitivity and average spatial resolution were measured from a ²²Na point source and were 5.0 % and 2.5 mm, respectively, for the slant mode. Comparison between the slant mode and the non-slant mode showed no remarkable difference in terms of the sensitivity distribution and spatial resolution performance. Therefore, we concluded that the SROP geometry has a good potential as an open geometry especially suitable for in-beam imaging.