FPGA Implementation of Discrete Fourier Transform Core Using NEDA

Transforms like Discrete Fourier Transform (DFT) are a major block in communication systems such as OFDM, etc. This paper reports architecture of a DFT core using new distributed arithmetic (NEDA) algorithm. The advantage of the proposed architecture is that the entire transform can be implemented using adder/subtractors and shifters only, thus minimising the hardware requirement compared to other architectures. The proposed design is implemented for 16 - bit data path (12 - bit for comparison) considering both integer representation as well as fixed point representation, thus increasing the scope of usage. The proposed design is mapped on to Xilinx XC2VP30-7FF896 FPGA, which is fabricated using 130 nm process technology. The hardware utilization of the proposed design on the mapped FPGA is 295 slices, 478 4-input LUTs and 304 slice flip flops. The maximum on board frequency of operation of the proposed design is 79.339 MHz. The proposed design has 72.27% improvement in area, 10.31% improvement in both maximum clock frequency and throughput when compared to other designs.