Abstract:
A fully differential analog multiplier for wideband operations is presented. The circuit consists of a p-MOSFET common-gate differential pair input stage for wideband imp...Show MoreMetadata
Abstract:
A fully differential analog multiplier for wideband operations is presented. The circuit consists of a p-MOSFET common-gate differential pair input stage for wideband impedance matching, a p-MOSFET Gilbert quad as a multiplier stage, and active loads. The circuit has been designed and fabricated in 90-nm CMOS. The test-chip area is 560 × 700 μm2. The overall power consumption is 3.7 mW from a 1.2-V power supply. In the case of input monocycle pulses with duration time of 700 ps, the measurements show an input-output energy ratio equal to 2, a conversion gain of 12.7 dB at intermediate frequencies in the range of 0.001-10 MHz for input tones in the range of 2-4 GHz, a noise figure of 14.4 dB (minimum) and compression points of -3.5 and -2 dBm for the two inputs. The performance of the proposed multiplier favorably compares with the state of the art.
Published in: IEEE Transactions on Circuits and Systems II: Express Briefs ( Volume: 58, Issue: 9, September 2011)