First results from the AX-PET demonstrator

The AX-PET demonstrator is based on a new concept in PET detectors, with LYSO crystals aligned along the z coordinate (patient's axis) and WLS (Wave-length shifter) strips placed orthogonal to them. This kind of structure permits to avoid parallax errors due to different depths of interaction of the photons in the crystals, to register the three coordinates of the impinging photon and to reconstruct Compton events. In this way both the spatial resolution and the sensitivity can be highly improved. Moreover, as both the LYSO crystals and the strips are readout via Geiger-mode Avalanche Photo Diodes (G-APDs) the detector is insensitive to magnetic fields and is then suitable to be used in a combined PET/MRI apparatus. A complete Monte Carlo simulation and dedicated reconstruction software, suited to the particular geometry arrangement, have been developed. The two final modules, each composed by 48 crystals and 156 WLS strips have been built and fully characterized in a dedicated test set-up. The results on the performances of the system obtained with a ²²Na point source (0.25 mm diameter) are reported.