Running pattern generation of humanoid biped in the three-dimensional space and its realization

This paper discusses the generation of a running pattern for a humanoid biped in the three-dimensional space and verifies the validity of the proposed method of running pattern generations via experiments. Two running patterns are generated independently in the sagittal plane and in the frontal plane and the two patterns are then combined. When a running pattern is created with resolved momentum control in the sagittal plane, the angular momentum of the robot at the Center of Mass (COM) is set to zero, as the angular momentum causes the robot to rotate. However, this also induces unnatural motion of the upper body of the robot. To solve this problem, the biped was set as a virtual under-actuated robot with a free joint at its support ankle, and a fixed point for a virtual under-actuated system was determined. Following this, a periodic running pattern in the sagittal plane was formulated using the fixed point. The fixed point is easily determined in a numerical approach. In this way, a running pattern in the frontal plane was also generated. In an experiment, a humanoid biped known as KHR-2 ran forward using the proposed running pattern generation method. Its maximum velocity was 2.88km/h. In the future, faster running and more stable running with controllers will be realized.