Cross-sectional comparison of insulation degradation mechanisms and lifetime evaluation of power transmission equipment

As the deregulation of the electric power industry moves forward, there is an increasing need for cost cutting and it is becoming exceedingly important to keep track of the residual life and identify the timing of replacement for power transmission equipment that has aged for several tens of years in the field. This paper, taking up the theme of "insulation degradation phenomena and lifetime evaluation for power transmission equipment", conducted cross-sectional comparison of different types of equipment although this kind of evaluation was made independently for these equipment types so far. This paper covered six types of equipment: gas insulated switchgear (GIS), gas insulated transformers, oil filled (OF) transformers, OF cables, crosslinked polyethylene (XLPE) cables, and power capacitors. As a result of examining the characteristics such as electric, thermal, mechanical, and hygroscopic degradations, each of these equipment types was found to have distinctive Voltage-time (V-t) and Voltage-number (V-N) characteristics, which sometimes greatly varied from those of others. Since thermal degradation is dominant for gas insulated transformers and oil filled transformers, their lifetimes depend on the reduction of mechanical strengths of Polyethylene Terephthalate (PET) or insulating paper. Therefore, it is effective to diagnose decomposition products such as CO, CO₂ and furfural generated in the thermal degradation mechanism. On the other hand, the influence of electric degradation has more significant impact on the other equipment types except OF cables. Such GIS components as epoxy spacers, XLPE cables, and power capacitors for which long-term ac voltages are dominant, are commonly characterized by the long-term V-t characteristics with a large gradient (small n-value). In terms of insulation structures, there is a possibility of reducing the degree of degradation by improving solids or the interface between solids and electrodes.