Combining Lidar and InSAR Observations over the Harvard and Duke Forests for Making Wide Area Maps of Vegetation Height

In this paper, two data sets consisting of co-located full-waveform lidar and InSAR observations are discussed, one over the Duke Forest, near Durham, North Carolina, and the other, the Harvard Forest, located in Western Massachusetts. Data for the Duke forest consists of AIRSAR and GeoSAR (both airborne sensors) interferometric SAR observations spanning in frequency from X-band down to P-band, and data from the GSFC's SLICER instrument. For the Harvard Forest, spaceborne data from JAXA's ALOS/PALSAR mission is used in conjunction with GSFC's LVIS instrument. Early work with SLICER and GeoSAR data has used a lookup table approach for generating a table that correlates the InSAR observables of differential height between X-and P-band observations, and X-band correlation magnitude to lidar derived height. This table was then used for estimating heights over the remaining swath, where lidar data was not available. A similar technique can be used for spaceborne data, in this case, over the Harvard Forest. In this paper, the comparison between lidar observations and the InSAR Duke observations are shown, and then followed by a preliminary treatment highlighting relationships in the ALOS/PALSAR Harvard data that can be exploited for similar purposes.