A stand-alone photovoltaic supercapacitor battery hybrid energy storage system

Most of the stand-alone photovoltaic (PV) systems require an energy storage buffer to supply continuous energy to the load when there is inadequate solar irradiation. Typically, Valve Regulated Lead Acid (VRLA) batteries are utilized for this application. However, supplying a large burst of current, such as motor startup, from the battery degrades battery plates, resulting in destruction of the battery. An alterative way of supplying large bursts of current is to combine VRLA batteries and supercapacitors to form a hybrid storage system, where the battery can supply continuous energy and the supercapacitor can supply the instant power to the load. In this paper, the role of the supercapacitor in a PV Energy Control Unit (ECU) is investigated by using Matlab/Simulink models. The ECU monitors and optimizes the power flow from the PV to the battery-supercapacitor hybrid and the load. Three different load conditions are studied, including a peak current load, pulsating current load and a constant current load. The simulation results show that the hybrid storage system can achieve higher specific power than the battery storage system.