Stress-optic effects, birefringence, and reduction of birefringence by annealing in fiber Fabry-Perot interferometers

The effects of inherent fiber birefringence, packaging stresses, and stress tuning on the behavior of a fiber Fabry-Perot interferometer are examined. A polarization doublet due to birefringence is observed. For birefringence of 1 ps/km, the doublet spacing is 40 MHz, at 1.5- mu m wavelength, independent of the FFP finesse or free spectral range, and is due mainly to the inherent fiber birefringence. It was found that annealing depressed-cladding single-mode fiber reduced the fiber birefringence, for example, from 40-80 MHz to 15-25 MHz. Where the bandpass of the FFP is greater than the birefringence doublet, this device should be polarization insensitive for most applications.<>