Paper-Thin InGaP/ GaAs Solar Cells

A paper-thin, lightweight InGaP/GaAs solar cell with high efficiency and flexibility has been developed. A high-efficiency thin-film cell can be obtained for cell fabrication both before and after removing the substrate. Introducing a tunnel junction as the contact layer between the cell and metal film improves cell characteristics (Fill Factor (FF) and open-circuit voltage (Voc)). A highly doped n-type layer is necessary for good ohmic contact at the metal film interface. High radiation resistance of a thin-film cell was confirmed for a GaAs cell with a one-micron base layer. The thin-film cell was laminated for better handling. The laminated cell efficiency was about 22%. Anti-reflective coating is necessary on the laminate film to improve cell efficiency. A prototype unit panel using the laminated cells was developed for space application. An output power per weight of over 1W/g is possible for the unit panel. However, development of a bypass diode with thin-film structure is currently a problem, and reliability tests need to be performed for the unit panel