Thermally-stimulated current and dielectric loss measurement of polypropylene and Teflon-FEP films immersed in diarylethane

Some properties of oil/PP (biaxially stretched polypropylene) and oil/FEP (Teflon FEP) composite insulators have been investigated with TSC (thermally stimulated current) techniques. The oil/PP system showed three TSC peaks originating from carriers captured in the swollen surface region of the PP. The TSC spectra depended strongly on the polarity of the poling voltage and on the impregnating temperature. Their analysis yielded information on the carrier traps existing near the PP surface in the oil/PP interface region. On the other hand, the TSC spectrum of the oil/FEP system has a small impregnating temperature dependence and a small effect of the poling voltage polarity. The difference in TSC between oil/PP and oil/FEP systems is closely related to the difference in the oil-polymer interaction. The TSC is a useful method for investigating carrier traps in the surface region and their change due to the oil-polymer interaction. To investigate further the relation between the carrier traps and tan/spl delta/, collecting bias TSC was measured on a specimen to which an ac voltage was applied. The results indicate that the decrease in tan/spl delta/ during the ac voltage application depends on the amount of trapped carriers near the polymer's surface or, the decrease in carriers in the oil.<>