A 300-MHz digitally compensated SAW oscillator

A method for compensating for the inherent temperature sensitivity of surface-acoustic-wave (SAW) oscillators is described. Results for a 300-MHz digitally compensated SAW oscillator (DCSO) show a reduction of temperature-induced frequency variation from +or-125 parts per million to +or-1.4 parts per million over the temperature range of -23 to 75 degrees C. This is accomplished using simple digital circuitry and microprocessor control. The temperature-sensing scheme, using a SAW structure with two delay paths of different temperature sensitivity on the same AT-cut quartz substrate, virtually eliminates thermal resistance and time-constant problems. Advantages over ovenized systems include fast warmup; reduced size, weight, and power dissipation; low cost potential; and the ability to compensate for other sources of frequency drift.<>