Dual sepic PWM switching-mode DC/DC power converter

A steady-state analysis and experimental results for a dual sepic pulse-width-modulated (PWM) DC/DC power converter for both continuous and discontinuous modes of operation are presented. The converter is dual to a sepic converter, but it can also be derived from a forward converter by replacing one of its rectifier diodes with a coupling capacitor. The circuit acts as a step-down or step-up converter, depending on the value of the ON switch duty cycle. The transformerless version of the converter has a positive DC/DC voltage transfer function. Therefore, the circuit is suitable for distributed power systems. Design equations for all circuit components are derived. Experimental results measured at 100 kHz were in good agreement with theoretical predictions.<
>