Loading [MathJax]/extensions/TeX/ietmacros.js
Design of a flexure-based gripper used in optical fiber handling | IEEE Conference Publication | IEEE Xplore

Design of a flexure-based gripper used in optical fiber handling


Abstract:

In optical fiber handling, a major requirement for the handling tools is to avoid introducing flaws on the cladding surface or excessive stress in the core. Conventional ...Show More

Abstract:

In optical fiber handling, a major requirement for the handling tools is to avoid introducing flaws on the cladding surface or excessive stress in the core. Conventional tools built with bearing-based mechanisms are difficult to meet the requirements because they cannot precisely control their motion and the gripping force due to backlash and Coulomb friction in their joints. The flexure-based tools however, due to absence of Coulomb friction and backlash in their motion, can provide a solution to the challenges. This paper presents a design method for a flexure-based gripper used in fiber handling. A prototype of the gripper developed by means of the method is described as well.
Date of Conference: 01-03 December 2004
Date Added to IEEE Xplore: 13 June 2005
Print ISBN:0-7803-8645-0
Conference Location: Singapore

References

References is not available for this document.