A low power and high speed CMOS Voltage-Controlled Ring Oscillator

In this paper a new Voltage Controlled Ring Oscillator is presented. The proposed VCO uses partial positive feedback in its delay cell, allowing the circuit to operate with single two stages, achieving high speed with reduced power consumption. The new VCO has a wide range of operation frequencies (0.2 at 2.1 GHz), good linearity between the output frequency and the control voltage, phase noise of -90 dBc/Hz at 100 kHz offset and it only consumes 7.01 mW in its central frequency of 1.2 GHz using a 3.3 V power supply. The circuit was fabricated in a 0.35 /spl mu/m CMOS-AMS process and occupies an area of 67.5/spl times/77.5 /spl mu/m/sup 2/.