Re-circulating linac vacuum system

The vacuum system for a proposed 2.5 GeV, 10/spl mu/A re-circulating linac synchrotron light source is readily achievable with conventional vacuum hardware and established fabrication processes. Some of the difficult technical challenges associated with synchrotron light source storage rings are sidestepped by the relatively low beam current and short beam lifetime requirements of a re-circulating linac. This minimal lifetime requirement leads directly to relatively high limits on the background gas pressure through much of the facility. The 10/spl mu/A average beam current produces very little synchrotron radiation induced gas desorption and thus the need for an "ante-chamber" in the vacuum chamber is eliminated. In the arc bend magnets, and the insertion devices, the vacuum chamber dimensions can be selected to balance the coherent synchrotron radiation and resistive wall wakefield effects, while maintaining the modest limits on the gas pressure and minimal outgassing.