Optical readout and control systems for the CMS Tracker

The Compact Muon Solenoid (CMS) Experiment will be installed at the CERN Large Hadron Collider (LHC) in 2007. The readout system for the CMS Tracker consists of /spl sim/10 million individual detector channels that are time-multiplexed onto /spl sim/40000 uni-directional analogue (40MS/s) optical links for transmission between the detector and the /spl sim/65m distant counting room. The corresponding control system consists of /spl sim/2500 bi-directional digital (40Mb/s) optical links based upon the same components as far as possible. The on-detector elements (lasers and photodiodes) of both readout and control links will be distributed throughout the detector volume in close proximity to the silicon detector elements. For this reason, strict requirements are placed on minimal package size, mass, power dissipation, immunity to magnetic field and radiation hardness. It has been possible to meet the requirements with the extensive use of commercially available components with a minimum of customization. The project has now entered its volume production phase after successful completion of technical feasibility. Components have been identified that meet both the stringent analogue performance targets and are sufficiently radiation-hard for use in the CMS Tracker, where lifetime radiation exposure is expected to reach /spl sim/3.4/spl times/10/sup 14//cm/sup 2/ fluence and /spl sim/150kGy dose. Analogue and digital system performance, as well as the component radiation hardness and quality assurance procedures, are reviewed this paper.