A robotic end-effector for grasping postal sacks

This article describes a new class of end-effectors that can be used with robotic and material handling devices for grabbing and holding deformable objects with undefined shapes such as sacks and bags. These end-effectors can grab and hold filled sacks from any point on the sack and regardless of the sack orientation and position. The first prototype end-effector, designed for U.S. Postal Service, has two rollers. The rollers are pushed toward each other by the force of a spring. When the rollers are powered to spin, the inward spinning of the rollers causes the sack material to be dragged in between the rollers due to the friction between the surfaces of the rollers and the sack material. The spring pushes the rollers toward each other with sufficient force to hold the sack material in place between the rollers. The end-effector described here has been evaluated and proven to be effective in grabbing and holding postal sacks.