A coupled multimodal planar transmit RF array for ultrahigh field spine MR imaging

Objective: Ultrahigh-field MRI, such as those operating at 7 Tesla, enhances diagnostic capabilities but also presents unique challenges, including the need for advanced RF coil designs to achieve an optimal signal-to-noise ratio and transmit efficiency, particularly when imaging large samples. Methods: In this work, we introduce the coupled planar array, a novel technique for high-frequency, large-size RF coil design with enhanced the RF magnetic field (B1) efficiency and transmit performance for ultrahigh-field spine imaging applications. This array comprises multiple resonators that are electromagnetically coupled to function as a single multimodal resonator. The field distribution of its highest frequency mode is suitable for spine imaging applications. Based on the numerical modeling and calculation, a prototype of the coupled planar array was constructed and its performance was evaluated through comprehensive numerical simulations, rigorous RF measurements, empirical tests, and a comparison against a conventional surface coil with the same size and geometry. Results: The results of this study demonstrate that the proposed coupled planar array exhibits superior performance compared to conventional surface coils in terms of B1 efficiency for both transmit (B1+) and receive (B1-) fields, specific absorption rate (SAR), and the ability to operate at high frequencies. Conclusion: This study suggests a promising and efficient approach to the design of high-frequency, large-size RF coils for spine MR imaging at ultrahigh magnetic fields. Significance: The coupled planar array offers a practical solution to overcome scalability and efficiency limitations in ultrahigh-field spine MRI, enabling improved RF performance without requiring complex multi-channel systems.