Synthesis of Analog and Mixed-Signal Circuits on a Programmable Array

In this article, a novel field-programmable analog array (FPAA) has been developed for the configurable implementation of various analog circuits. The proposed architecture not only supports system-level reconfiguration but also enables transistor-level programmability. The FPAA is comprised of a $3\times 4$ configurable analog block (CAB) array, with a single configurable logic block (CLB) added to each column to allow for the programming of digital circuits. Passive devices, including programmable capacitors and resistors, and active transistor pairs (TPs), are utilized to implement both continuous-time and discrete-time circuits. A placement algorithm is developed that efficiently maps analog circuits onto the FPAA fabric by finding the optimal vertical and horizontal locations for the assignment of transistors. In addition, to reduce the complexity of placing devices on the fabric, a technique is developed that matches TPs in the same vertical level to predefined topologies in a library. Routers are included to connect devices implemented on the FPAA fabric. The proposed FPAA occupies an area of 4 mm² in a TSMC 65-nm fabrication process. The smaller circuits implemented on the FPAA fabric include a folded-cascode amplifier, a strongArm comparator, a continuous-time integrator, and a switch-capacitor integrator. The larger analog and mixed-signal circuits implemented on the FPAA fabric include a four-stage pipeline analog-to-digital converter (ADC) and a first-order delta-sigma modulator. The programmed folded-cascode amplifier exhibits a tunable gain of 28.3 dB to 34.8 dB and a programmable 3-dB bandwidth of 3.3 MHz to 5.3 MHz. The configured comparator provides a resolution of less than 3 mV when comparing two signals. The implemented first-order delta-sigma modulator operates at a frequency of 15 MHz and provides an effective number of bits (ENOBs) of 6.8 when utilizing an oversampling ratio of $128\times $ . The configured pipeline ADC provides an ENOB of 3.7 for a sampling frequency of 15 MHz.