Abstract:
This letter proposes a novel hybrid automatic repeat request with chase combining assisted sparse code multiple access (HARQ-CC-SCMA) scheme. Depending on whether the sam...Show MoreMetadata
Abstract:
This letter proposes a novel hybrid automatic repeat request with chase combining assisted sparse code multiple access (HARQ-CC-SCMA) scheme. Depending on whether the same superimposed packet is retransmitted, synchronous and asynchronous modes are considered for retransmissions. Moreover, a factor graph aggregation (FGA) method is used for multi-user detection. Specifically, a large-scale factor graph is constructed by combining all the received superimposed signals and message passing algorithm (MPA) is applied to calculate log-likelihood ratio (LLR). Monte Carlo simulations are preformed to show that FGA surpasses bit-level combining (BLC) and HARQ with incremental redundancy (HARQ-IR) in synchronous mode. Moreover, FGA performs better than BLC at high signal-to-noise ratio (SNR) region in asynchronous mode. However, FGA in asynchronous mode is worse than BLC at low SNR, because significant error propagation is induced by the presence of failed messages after the maximum allowable HARQ rounds.
Published in: IEEE Signal Processing Letters ( Volume: 32)