Active Aerial Reconfigurable Intelligent Surface Assisted Secure Communications: Integrating Sensing and Positioning

This paper proposes an active aerial reconfigurable intelligent surface (ARIS) assisted secure communication framework by integrating sensing and positioning against a mobile eavesdropper. In the proposed scheme, the base station (BS) beamforms the private information to the legitimate user and jams the eavesdropper with artificial noise (AN), while reconfiguring the phases and amplitudes of the passive signal by the active ARIS for promoting secure communications. To acquire the channel state information of the time-vary wiretap channel, the BS tracks the position of the eavesdropper by exploiting the reflected AN. Based on the tracked position of the eavesdropper in the previous time slot, we propose a secure communication scheme that aims to maximize the secrecy rate in the current time slot. This scheme is assisted by the ARIS through jointly optimizing the passive beamforming of the privacy information and AN, the reflection matrix of the ARIS, and the position of the ARIS. In the case of this non-convex quandary with highly coupled variables, we opt to disassemble it into three constituent subproblems and design an alternating optimization framework, where the optimal power beamforming at the BS is derived using a successive convex approximation method and semi-positive definite relaxation technique, the reconfigurable coefficient of the ARIS is optimized using the majorization-minimization algorithm, and the optimal position of the ARIS using the threedimensional network is obtained by the deep deterministic policy gradient algorithm. Simulation results demonstrate the superior performance of the proposed scheme in the context of the secrecy rate when compared with benchmark schemes. By adopting the active beamforming and positioning technique, the secrecy rate can be increased by 38.3% and 10.8%, respectively.