Generating a General Culturing Microorganism Pattern Using a Delta Parallel Robot and Cam-in-Hand Calibration Method

Robots can play a vital role in laboratory tasks, especially in culturing microorganisms. Currently, many of these operations are performed manually, which leads to biased and irreproducible results. This paper explores a calibration method for minimizing errors of a performing two certain laboratory tasks of swabbing and pipetting. This leads to enhanced accuracy and productivity. This research intends to culture microorganisms in a petri-dish in a specific pattern, measuring the coordinates of each object in the output image so the object location in the real world can be calculated. This research investigates the Cam-in-Hand method for a Delta Parallel Robot, meaning that the camera is mounted on the End-Effector. In this approach, a method of translating image coordinates into real-world coordinates is introduced. It is essential to provide an additional coordinate (in this case $z -$value) before the conversion, given that the camera outputs a 2D image. A vector-based image, in SVG format, as input to the algorithm generates a set of coordinates which determines the main points for swabbing or pipetting operation. Using this data, an array of coordinates is linearly interpolated in 3D space for the swabbing operation. Conversely, the trajectory generated for pipetting uses the 4-5-6-7 interpolating polynomial. The robot then adheres to following the interpolated array of coordinates as a function of time, using a PID controller. The pipetting device is built with a 3D printer using PLA materials. The calibration is done in different heights. The Camin-Hand method leads to ±1 cm precision as a result. Minimum, maximum, and mean errors are 0.092,1.61 and 0.76 respectively for the central point.