Application of MCU in Engineering of Intelligent Building Network

In the network engineering of the intelligent buildings, the horizontal subsystem brings about a problem of cables positioning on distribution frame due to a large number of network cables. In view of the emerging generic cabling engineering of the intelligent buildings in the implementation process of each link, this article discusses engineering quality management issues. Based on MCU, a visualized network cable positioning tester has been designed, which can realize the integration of network cable source positioning and communication test, improve the working efficiency, and avoid the shortcomings of traditional double-intercom line test because of its single operability. The working condition is promoted by the visualization of test results. The corresponding treatment methods and suggestions are given. In the acceptance of network generic cabling engineering of a building in the institute, the expected result has been achieved. The application of the visualized network cable positioning tester has a reference significance both in the large network engineering and the small floor local area network. Therefore, based on the requirements of similar national and industry standards and accumulated experience in computer information network engineering, this article has mainly discussed the key points of quality monitoring for peer communication.