A Wearable Biofeedback Device for Monitoring Tibial Load During Partial Weight-Bearing Walking

Patients with tibial fractures are usually advised to follow a partial weight-bearing gait rehabilitation program after surgery to promote bone healing and lower limb functional recovery. Currently, the biofeedback devices used for gait rehabilitation training in fracture patients use ground reaction force (GRF) as the indicator of tibial load. However, an increasing body of research has shown that monitoring GRF alone cannot objectively reflect the load on the lower limb bones during human movement. In this study, a novel biofeedback system was developed utilizing inertial measurement units and custom instrumented insoles. Based on the data collected from experiments, a hybrid approach combining a physics-based model and neural network architectures was used to predict tibial force. Compared to the traditional physics-based algorithm, the physical guided neural networks method showed better predictive performance. The study also found that regardless of the type of weight-bearing walking, the peak tibial force was significantly higher than the peak tibial GRF, and the time at which the peak tibial compression force occurs may not be consistent with the time at which the peak vertical GRF occurs. This further supports the idea that during gait rehabilitation training for patients with tibial fractures, monitoring and providing feedback on the actual tibial force rather than just the GRF is necessary. The developed device is a non-invasive and reliable portable device that can provide audio feedback, providing a viable solution for gait rehabilitation training outside laboratory and helping to optimize patients’ rehabilitation treatment strategies.