Fully 3D-Printed Hemispherical Dielectric Resonator Antenna for C-band Applications

This paper investigates the 3D printing of a hemispherical dielectric resonator antenna (DRA) on a ground plane made from a 3D printed conductive material. The DRA is designed to operate in the C-band (3700 – 4200 MHz) and is intended for satellite communication (SATCOM) applications. The proposed antenna prototype achieved a -10 dB bandwidth of 12.2% with an average and peak gain of 4.69 dBi and peak gain of 5.39 dBi respectively.