Hybrid Multibeamforming Receiver With High-Precision Beam Steering for Low Earth Orbit Satellite Communication

A hybrid multibeamforming receiver for low Earth orbit (LEO) satellite communication in the Ku-band is designed and tested. The proposed receiver is implemented with eight channels to enable the multibeam control. The proposed receiver, including both analog and digital beamforming structures, is capable of multibeam reception using both analog and digital beamforming techniques simultaneously or selectively. Analog beamforming is implemented by employing a local oscillator phase shifter using direct digital synthesis and phase-locked loop (PLL) structures. In digital beamforming, a software-defined radio can control the phase of the signal in the digital baseband. The multibeam received using the proposed hybrid multibeamforming receiver was measured at 11.7 and 12.7 GHz in an anechoic chamber. The phase-control resolutions of analog and digital beamforming were 0.022° and 0.72°, respectively. Analog beam-switching speed is slower than digital beamforming because it depends on the settling time of the PLL circuit, but it has a high phase-control resolution. Therefore, by using analog and digital beamforming when precise beam tilting and fast beam switching are required, respectively, the proposed hybrid multibeamforming is shown to be suitable in accordance with the communication situation.