Discrimination of Target and Mainlobe Jammers With FDA-MIMO Radar

This letter focuses on discriminating true target from mainlobe jammers using a frequency diverse array-multiple-input multiple-output (FDA-MIMO) radar. To this end, a three-stage detection and discrimination architecture is proposed. Specifically, mainlobe jammers caused by large time delays can be discriminated from the true target based on the range degrees-of-freedom (DOFs) of FDA-MIMO radar, while the true target and jammers generated with small time delays are distinguishable in the fast time domain. In particular, a binary hypothesis test is formulated for discrimination, where the
$H_{1}$
hypothesis contains the true target, while the
$H_{0}$
hypothesis contains the unknown mainlobe jammer. The mainlobe jammer can be formulated as either a known subspace model or an unknown rank-one model. The former leads to a subspace-based selective detector (SSD) and the latter generates a rank-one-based SD (ROSD). Then, the formulated tests are handled using the generalized likelihood ratio test (GLRT) criterion. At the analysis stage, the selectivity and detection performance are compared with the conventional GLRT and selective receivers. Simulation results validate that the proposed detectors achieve satisfactory detection performance while providing the selectivity to mainlobe jammers.